| RV3000 |
 Increase productivity with the use of the RV3000 MaxMatic® self-feeding riveter. The MaxMatic® riveter holds 40 to 100 rivets (depending on rivet diameter) on a strip in its magazine. After a rivet is installed, the nose retracts, the next rivet is inserted in the nose and it returns to the ready position. The operator simply has to point and shoot. This tool economizes operator motion by eliminating manual rivet loading and travel between part bins and the work piece. The MaxMatic® is lightweight and ergonomic to reduce operator fatigue. |
|
| RV14GE |
The Allfast/Olympic model RV14GE is an
installation tool developed to install
the majority of blind rivets now in
use. Operating on air pressure of 80
to 110 PSI (Pounds per square inch)
and using the recommended type pulling
head, the RV14GE installation tool
will install 3/32 inch through 3/16
inch diameter standard and special
Allfast/Olympic self-plugging and pull-thru
blind rivets in a wide range of grips,
as well as similar blind rivets manufactured
by other companies. The RV14GE installation
tool is designed for maximum performance
using Allfast/Olympic pulling heads
of Group 1 (screw-on type) and Group
2 (snap-on type). Pulling heads of
other manufacturers also may be used
directly on this tool. |
|
| RV15GA |
 The Allfast/Olympic RV15GA installation tool is designed to meet requirements established by MIL-R-85188 Riveter, Power, Pneumatic-Hydraulic or Pneumatic Blind Rivet Installation. Operating on air pressure of 90 to 120 PSI and using the appropriate pulling head, the RV15GA will install rivets covered by MIL-R-7885 and NAS9300 rivets, blind, structural, locked and friction retained spindle, general specification for: other pulling heads are adaptable to this tool for installation of various blind rivet designs from 3/32 to 1/4 inch diameter. |
|
|
|
| RV30GE |
 The Allfast/Olympic model RV30GE Riveter is an installation tool developed to install the majority of blind rivets now is use. Operation on air pressure of 89 to 110 PSI and using the recommended type pulling head, the RV30GE installation tooling will install 3/32 inch through 1/4 inch diameter standard and special Allfast/Olympic self-plugging and pull-thru blind rivets in a wide range of grips, as well as similar blind rivets manufactured by other companies. The RV30GE installation tool is designed for maximum performance using Allfast/Olympic group 1 (screw-on type) or group 2 (snap-on type) pulling heads. |
|
| RV50GB |
 The Allfast Model RV50GB Pneumatic Power Gun is a light-weight pistol grip type gun designed as a compact power tool for rapid and easy installation of smaller diameter blind rivets. The gun is seven inches high and weighs 2-1/4 pounds. It has a maximum power stroke of 0.625 ". It is recommended for use with air pressure of 90 to 120 psi. The gun must be equipped with an Allfast screw-on type pulling head of a diameter corresponding to the diameter of the rivet being installed. |
|
| RV51GA |
 The Allfast Model RV51GA Pneumatic Power Gun is a light-weight pistol grip type gun designed as a compact power tool for rapid and easy installation of smaller diameter blind rivets. The gun is seven inches high and weighs 2-1/4 pounds. It has a maximum power stroke of 0.625". It is recommended for use with air pressure of 90 to 120 psi. The gun must be equipped with an Allfast screw-on type pulling head of a diameter corresponding to the diameter of the rivet being installed. |
